Q: P0306 code after replacing COP, wires and spark plugs. What else could it be?

asked by on

Had stalling problems pull codes for 5 and 6 cylinder misfire. Replaced spark plugs, wires, and COP on cylinder 6. Still have misfire on cylinder 6, what else could it be?

My car has 175000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. P0306 code after replacing COP, wires and spark plugs. What else could it be?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car floods bad when cold. If I give it a little gas it jumps and jerk and if I mash it on down it takes off. I've replaced the O2 sensor and coolant temp sensor.

This may be related to a dirty or faulty idle air control valve. This is a unit that reads the air intake at low or idle speeds and relays this information to the computer which then makes adjustments to fueling....

Q: When i start my car, my car will begin to shake, which goes away after a minute or by me turning the car off and starting again

The problem sounds like the engine may be misfiring in the ignition system or the computer has a problem with one of its sensors like the camshaft or crankshaft sensors. The best way to narrow down the cause of the...

Q: Burning wire smell coming from the alternator

The howling sound you are hearing is most likely your alternator failing. When it starts to make this kind of sound, this is a sign of the bearings inside beginning to fail (hence the whining noise) or the diodes inside...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.