Q: Overheating

Garage doors that were made before 1996 are referred to as non-rolling code. Here is how you program them with your HomeLink garage door system. Insert your key into the ignition, and turn the ignition switch to ON/RUN. Locate the...

Many different problems can cause an engine to run rough and lack power. The first step is to retrieve the diagnostic code associated with the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). This will provide a general idea of where to begin the...

Yes. The A/C system will not let the clutch engage unless there is enough pressure in the system to engage the cycling pressure switch. If you want to have this looked at, a certified technician, such as one from YourMechanic...

Hello. From what you describe it would appear that your tire may be making contact with something and causing the noise and vibration. Noises can be difficult to diagnose without driving the vehicle, however if you have determined what wheel...

Hello, thanks for writing in. You need to check all the main fuses in the engine fuse box. You most likely blew one or more which is why the issue is still occurring. If you need help having the problem...

Hi there. Engine mounts can definitely cause a roughness at idle, clunks, and thumps upon acceleration. Smooth out of gear and rough in gear is one indication of a mount type issue (https://www.yourmechanic.com/services/engine-mount-replacement). It may feel better in reverse than...

Hi there - a common cause of this problem with BMWs is loose sway bar links (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-stabilizer-bar-links). It is also possible that one of the many heat shields has come loose somehow and is rattling. I recommend a noise inspection...

I would recommend having all of the vaccum lines checked first since those are a much less expensive repair than carburator issues. If any vaccum lines are old, brittle, cracked, or broken, I would recommend having them replaced. If this...

Your vehicle use a two belt system as depicted in this diagram (https://www.2carpros.com/diagrams/nissan/altima/1993). If you desire, a mechanic dispatched by YourMechanic can re-install the belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) and, as is required during any belt replacement, inspect all of the rolling elements...