Q: Misfire

asked by on

Hi my van has this misfire and engine shakes I changed the spark plugs and coil pack and still does the same now I’m getting a code saying system to lean bank 1 and 2 don’t know what els to do

You either have low fuel pressure or clogged fuel injectors. Have pressure checked first and if it is good then have fuel injectors cleaned and may need to be replaced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car jerks after taking foot off gas

I'm not sure about the "plastic bag noise". The jerking upon deceleration could have something to do with the transmission not downshifting properly; this could be due to internal transmission mechanical problems, or a problem with the electronic transmission controls....

Q: Q: Transmission problem

Of course, be sure the transmission fluid level is correct, the fluid is not contaminated and the filter is not clogged. A fault like the one you are describing is likely to be due to a hydraulic control issue. If...

Q: I replaced my shift solenoid B becuase it was stuck open well this shade tree mech did it now my tranny wont shift

Hello. The most common problem with the use of a shade tree mechanic is they tend to use substandard parts. Cheaper parts often lead to expensive repairs. This concept is easy to sell if you explain the likely hood of...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...