The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Pedal effort is often a very subjective measure, although there are generally accepted standards provided by the Society of Automotive Engineers (SAE) when developing a new vehicle. Many small cars and light trucks may have a soft or “over-boosted” feeling...
Having an engine heater is particularly helpful when you live in a colder climate, making it easier to start your vehicle and gain better fuel economy during the winter months. If your vehicle is equipped with an engine heater, it...
Hi, it is possible for the O2 sensor to not turn on the Check Engine Light if it is failing slowly. It's also possible for leaks to occur, which can throw off the sensors readings. I would recommend having a...
Hello. You can indeed disable the steering lock system by removing the fuse, however you would need to get the vehicle started before doing so. The steering wheel lock system uses an actuator that moves back and forth to lock...
Hello. The ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement) is available separately, and as part of the control arm assembly (https://www.yourmechanic.com/services/control-arm-assembly-replacement) as you note. Although it can be purchased separately, removing it and replacing it into the control arm requires heavy duty presses and...
Hi there. The following steps are to check for top dead center on your engine. Remove the left valve cover on the engine rotate the crankshaft until the key way is facing up Check the camshaft on the left that...
The The crankshaft seal is located in the crankshaft of your vehicle. The crankshaft converts rotary into linear motion. This means it uses the force created by the pistons in the engine to move in a circular motion so the...
For For those who operate a four-wheel drive or all-wheel drive vehicle, there are a number of important parts that are necessary. The front output shaft oil seal is one of those parts, and is a gasket that is circular...