Q: Leak in power steering

asked by on

There is a leak in power steering system. The car is often not driven for long periods.

The power steering pump or hoses could be the cause but the system would need a complete diagnostic inspection to verify the leak before a recommendation for repairs is given. I recommend having a mechanic like one from YourMechanic check the system to locate and repair any leaks in the power steering system in order to restore your vehicle back to full function.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Leak in power steering

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2000 Tundra has a small current leak that kills the battery if the truck hasn't been driven in a week or so.

Hi Larry. Thanks for contacting us today. While removing the battery cables reduces the battery drain, it doesn't resolve the problem. What you're describing is called a parasitic battery drain and is often caused by an electrical short or open...

Q: What does it mean if you power steering light comes on and I can turn or drive right for a few seconds then goes off?

Hello, thank you for writing in. The power steering system needs to be inspected. Even if the light turns off, the issue may reoccur soon. The system is electronic as opposed to the standard hydraulic system used in older and...

Q: Putting in a new battery but the horn, lights, and wipers come on and won't stop.

Check the light switch, the horn switch, and wiper switch. If the switches are not working, then they will need to be replaced. If the switches are good, then there is a loose or broken ground wire on the steering...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.