Q: inner tie rod torque spec on a 2006 nissan maxima ?

asked by on

trying to torque my inner tie rod but cant find any info. please help.

My car has 100000 miles.
My car has an automatic transmission.

The inner tie rod nut should be torqued to 90 to 100 foot pounds and secured with lock.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. inner tie rod torque spec on a 2006 nissan maxima ?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Popping sound when braking and turning.

It's difficult to say for sure without hearing the noise firsthand, but it sounds like you may have a bad CV axle. The CV axle transmits power from the transmission to the wheels, while following the up and down motions...

Q: Valve manifold is stuck

Hi there. The only thing that you can do is remove the upper intake manifold runner control and replace it with a good used one or a new one. If you need further assistance removing the intake manifold runner control,...

Q: Hello ben my car is making like a crack noise or some kind of noise everytime i turn and or accelerate. rattling coming from back

Hi Alex. Cracking noises are typically caused by metal to metal contact or a bushing that is pinching between metal components. On the front suspension, there are a few possible sources including steering stabilizer bar bushings, tie rod bushings, lower...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...