Q: I opened my trunk by accident in the house with my keypad, can I lock it back using the keypad?

asked by on

Can I lock my trunk BACK with the keypad

You cannot use the remote to close a trunk after you have opened it. You will need to close it manually.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. I opened my trunk by accident in the house with my keypad, can I lock it back using the keypad?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I open the trunk from inside the car?

Your trunk can be opened from inside the vehicle. To do so, lift up on the Trunk Release switch, which is located below the driver’s seat, near the door.

Q: Q: Coolant leak.

Hi there. There are a number of areas that the coolant can leak from on your vehicle. If the coolant only leaks when the engine is running then it is typically a water pump. If it is leaking when the...

Q: I step on the gas it feels like it is forced to accelerate and the rpm's shoot up. The obd 2 scanner reads po700.

The code P0700 is for the transmission having a problem. I would recommend checking to make sure the fluid is full and not pouring in any additives until the problem is diagnosed. If the fluid is full and it does...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...