Q: How many control arm bushings are needed on 2008 XJ8 front suspension?

asked by on

How many front control arm bushings are there on my 2008 XJ8?

My car has 110000 miles.
My car has an automatic transmission.

You will have two inner bushings for each control arm and one outer ball joint for each arm. You have upper and lower control arms.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How many control arm bushings are needed on 2008 XJ8 front suspension?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What do these codes mean?

A P0108 says that the ECU is seeing a higher voltage from the Manifold Absolute Pressure (MAP) sensor than it expects. This could be a bad vacuum line, a bad sensor, or a bad electrical connection to the sensor. A...

Q: Where do you hook up to charge AC on97e420benz and where is it located? 1997 Mercedes E420

Hello - the AC "charge port" - which is the low pressure port - is on the driver side of the engine compartment, in-between the ABS pump and the engine. The port has a black or dark blue plastic cap,...

Q: Noises coming from under the dash

Hello. The specific causes are numerous and have been set forth in numerous Technical Service Bulletins for your vehicle model. They are also dependent on VIN number. A mechanic would have to systemically rule out each cause in order to...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.