Q: How do the door-mounted courtesy lights work?

asked by on

How do the door-mounted courtesy lights work?

The doors of your Accord are equipped with courtesy lights. They are designed to provide illumination to aid in getting into and out of the car in low-light situations. These lights are not adjustable. The light will turn on when the door is opened, and go off when it closes. The light around the ignition switch will also turn on when the door is opened, and remain on for about 30 seconds after you close the door.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do the door-mounted courtesy lights work?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the tail light indicator mean?

The tail light indicator is located on the instrument panel. This light illuminates when the tail lights are turned on.

Q: How do I properly secure a LATCH compatible car seat into my seats?

If you are using a LATCH (Lower Anchors and Tethers for Children) compatible car seat, you are already off to a good start as the LATCH system uses a standard set of attachments and tethers to consistently install car seats...

Q: How much pag 46 oil goes in a new condenser for 2005 Honda Accord?

Hi there. You will need to add 1 ounce of Pag 46 oil to the condenser. Also if you are just replacing the condenser, I recommend replacing the receiver dryer as well for excessive moisture in the system. The system...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.