Skip the auto shop - Our mechanics make house calls

Q: How do I view the average fuel economy?

asked by on

How do I view the average fuel economy?

A: The average fuel economy shows you the gas ...

The average fuel economy shows you the gas mileage that your vehicle has been averaging. The average fuel economy is directly tied to the trip meters, and will be reset when the trip meter is reset. To view the average fuel economy, press the Sel/Reset button until the information display shows the average fuel economy on the instrument panel.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Does wheel need removed to do brake fluid

With most vehicles, it is not necessary to remove the wheels in order to bleed the brakes. Bleeder screws on brake calipers - or wheel cylinders if drum brake-equipped - can usually be accessed without the wheels being removed. Some...

Q: How do I accelerate when using cruise control?

If you are using the cruise control system, but need to accelerate, you can do so without canceling the cruise control. The cruise control will be canceled if you use the brake pedal, but not if you use the gas...

Q: Fluid leak on passenger's side.

The AC has a drain on the passenger side that if it gets clogged with debris then the AC water could back up into the passenger floor. Another issue could be the sunroof drains are getting clogged and could leak...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.