Q: How do I use the lane change signal feature?

asked by on

How do I use the lane change signal feature?

The lane change signal feature flashes the turn signal three times to let surrounding drivers know that you are changing lanes. To use this feature, pull up or push down on the turn signal level and immediately release.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the lane change signal feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: The Reduce Engine Speed/ Service Stability comes on in my car. We had it scanned and they said it was the THROTTLE/PEDAL POSITION

It sounds like the code may not have been properly cleared or potentially, there may be some wiring issues with the wires running to the throttle position sensor. I would suggest having a professional from YourMechanic come to your location...

Q: Why turn signal lever won't return to neutral position after turn is completed?

Hi there. There is a lock ring on the turn signal lever with a return spring that makes the lever return to the rest position. The lock ring is cracked or broken. You will have to disconnect the battery, remove...

Q: heater works for about 20 mins then starts to blow cold air

Check for low coolant level and, if low, there is a possibility of air trapped in the system. Check for collapsed (or soft) hoses. Check your engine operating temperature to see if it is in the normal range of 195...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...