Q: How do I use the intermittent wipers?

asked by on

How do I use the intermittent wipers?

The intermittent windshield wipers are a feature that allows you to control the speed of the windshield wipers. Here’s how to use them: 1. Push the windshield wiper lever down one notch to the INT position. This will turn the wipers on a low setting. 2. Rotate the intermittent time adjustment ring to control how frequently the windshield wipers wipe. 3. When the conditions are no longer wet, return the wiper lever to the Off position.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the intermittent wipers?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Windshield wipers not working

Hi. The windshield wiper system would have to be inspected to see if a fuse has blown, indicating a bad wiper motor. If the fuse is okay, then the system would have to be checked for a problem in the...

Q: I have a 2001 honda cr-v se 2 Li I4 engine. on the back of the throttle body is a im guessing it's some type of sensor,two mires p

You are correct. This is the throttle position sensor or TPS. You should not need any special tools to remove it. Most throttle position sensors are mounted to the throttle body with 7mm, 8mm, or tor bolts. If you have...

Q: P0014 Code, Replaced both camshaft actuators

You will need to have the vehicle scanned with a scanner that is capable of actuating the solenoids and monitor data at the same time. The actuators when actuated at 1200 rpms should cause the rpm to change up and...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...