Q: How do I use the automatic lighting control?

asked by on

How do I use the automatic lighting control?

The automatic lighting control is a feature that will automatically turn your headlights on when it is dark out. To use the automatic lighting control, locate the light switch, which is located on the turn signal lever (the turn signal lever protrudes from the left side of the steering column). Turn the light switch to AUTO to turn on the automatic lighting control.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the automatic lighting control?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the Malfunction Warning light mean?

The Malfunction Warning light is located on the instrument panel, and is connected to your emissions system. When your vehicle’s emissions are not as expected, the Malfunction Warning light will illuminate. The light will also come on if the system...

Q: I am worried my airbags won’t work in a crash

As long as any new electrical gremlins that pop up are not related to the same passenger airbag circuit, I would doubt that this repair would cause new electrical issues. Ford has had this specific issue come up in...

Q: I'm hearing a clicking noise while the car idles in Drive, as the engine idles high.

You may be hearing a solenoid for the vapor purge control system. This would be normal if it is a ticking noise that sounds like a clock ticking only when you give it a little gas and goes away when...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...