Skip the auto shop - Our mechanics make house calls

Q: How do I use the air conditioning?

asked by on

How do I use the air conditioning?

The air conditioning system brings cold air into your vehicle, to help keep you cool on hot days. To turn on the air conditioning, press the A/C button in the middle of the Fan Speed Control knob. A light will illuminate to confirm that the air conditioning is on. Press the button again to turn off the air conditioning.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2008 civic si ac works randomly. Fan kicks on but compressor does not. Mainly does it when it's really hot outside

There are a number of sensors that your car uses to decide whether to engage the compressor. Most of them are for safety, to keep the system from blowing a hose or freezing up. If your car has automatic climate...

Q: Fan stays on when car off

The blower motor resistor seems to be a common repair on your car. It can cause the blower motor to run when the key is off. The heat and AC and your car has a dedicated computer. It also could...

Q: Warranty

Hi There, The cylinders are in fact the core of the engine and may be covered under warranty depending on the specific terms of the warranty and what is damaged. The ignition coils may or may not be covered under...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...