Q: How do I use Sport mode?

asked by on

How do I use Sport mode?

Sport mode allows you to control the gears of your automatic transmission. To enter Sport mode, put the shifter in D, and then push it to the right. Then, push the shifter forwards, towards the +, to upshift, or push the shifter backwards, towards the – to downshift. You can push the shifter to the left, and back to D, anytime you want.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use Sport mode?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Tranny sliped now drives normal

Check the transmission fluid level. Proper checking instructions vary vehicle to vehicle but it's usually imprinted on the transmission fluid dipstick. Typical instructions will require you to check it while in Park, hot engine, and on level ground. If it...

Q: Car starting roughly

If you are hearing a grinding noise for a few seconds on engine start up, the timing chain tensioners are to blame. There are two chain tensioners, however, if one is bad, both are replaced. It is a rather large...

Q: Stays idling when I put it in gear, and the car doesn't move. When forced into any gear without the clutch, the car does not shut off.

Hi there. The clutch may be worn and slipping causing the engine to stay running as the shifter is put into a gear selection. If the clutch was working, when put into gear and let off the clutch pedal, the...

Related articles

P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.