Q: How do I turn on the dome lights?

asked by on January 19, 2016

How do I turn on the dome lights?

The dome lights provide light to the interior of your vehicle. To turn on the dome lights, press the Dome Lamp button. Press this button again to turn off the lights.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $65/hr

What others are asking

Vehicle dies when I give it gas.

The vehicle may have more than one problem causing this problem. These problems were from things like the coolant sensor giving false readings, engine control modules failing, throttle position sensors failing and the mass air flow sensors failing. All of...

What kind of coolant should I use?

It’s imperative that your vehicle is equipped with the coolant, especially if you use the air conditioning. The ideal coolant mixture for your car is 50% water, and 50% ethylene glycol antifreeze.

Automatic 2009 v6 mustang idling roughly and/or stalling after new duralast maf sensor install

Occasionally, on a part of this type there are meaningful differences between aftermarket and OEM. Therefore, to simplify the diagnostics, the OEM MAF sensor (as vended by a Ford dealer) could be installed. Once you have an original equipment, genuine...

Cylinder 6 doesn't work on my Ford Explorer

Hi. A cylinder not working can be caused by several things. Two reasons that are common are an injector or an ignition coil failing. I recommend examining the coil, the injector cable and the number cylinder six to see if...

Check engine light came on AutoZone said thermostat or gasket

To maximally help you, we need to know the specific diagnostic trouble code that was downloaded. The code will be a "format" such as P0135, just as one example. If you request a check engine light diagnostic a certified mechanic...

There's a whining sound coming from the front of the car - 2012 Chevrolet Cruze

Hello and thank you for your question. There are many different things that can cause a whining sound in the front of the vehicle, but the most common is a non-lubricated bearing inside an alternator. If the noise occurs...

My MAP sensor failed I replaced it then it failed again in one day

Hi and thanks for contacting YourMechanic. This issue is not the MAP sensor, but rather the mass air flow (MAF) sensor. This sensor is usually missed unless the computer sees it malfunctioning. Most of the time the MAF will get...

Cylinder 7 misfire in Ford F-150

A misfire code is a very common fault on your 2002 Ford F-150. The first step is to determine what the root cause is, from there it can be determined what needs to be replaced. Common causes are the spark...

Car is jerking forward when car is stopped with brake applied.

What you are describing is a real safety concern. You should have your Mustang's brakes checked out right away before you drive it anymore. It sounds like there may also be an idle control issue that is causing RPM's to...

Related articles

The Best Used Cars to Buy for Towing Light Loads
Towing Towing is tricky business and depending on the weight you’re dealing with, it really determines what vehicle is best for you. If it’s light loads you’re looking at towing, we’ve put together a list of the top five cars...
How to Find the Keyless Code on a Ford Explorer or Mercury Mountaineer
Many Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: Eliminate...
A Buyer's Guide to the 2012 Mazda CX-7
If If you want an SUV, but don’t care as much about the “utility” part as you do the “sport” features, you should take a look at what the 2012 Mazda CX-7 has to offer. Key Features With a turbo...