Skip the auto shop - Our mechanics make house calls

Q: How do I pair a phone with the voice recognition system

asked by on

How do I pair a phone with the voice recognition system

A: Your Bluetooth system can pair up to five p...

Your Bluetooth system can pair up to five phones. Here’s how you can pair them: 1. Press the voice command button. 2. When the system says “Ready”, and then offers a tone, say “Pair”. 3. The system will give you instructions, as well as a four-digit personal identification number (PIN) that you will need later. 4. Begin the pairing process on your mobile device by following the owner’s manual instructions. 5. Find the device titled “Your Vehicle” in your mobile phone, and follow the instructions to input the PIN given to you in step 3. 6. When prompted, provide a name for the paired device. 7. After the system confirms that the phone is paired, repeat steps 1-6 to pair more phones.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I create a speed dial?

The HandsFreeLink system can store up to 15 speed dial numbers. Here’s how to set them: 1. Press the Phone button. 2. Rotate the selector knob to Phone Setup, then press the selector knob. 3. Rotate the selector knob to...

Q: How do I use the Instantaneous Fuel Economy feature in the driver information center (DIC)?

The Instantaneous Fuel Economy feature in the driver information center (DIC) displays the fuel economy that your vehicle is currently achieving. To view the Instantaneous Fuel Economy feature, press the MENU button until the DIC displays Trip/Fuel Information Menu, then...

Q: The engine light is on and displaying a P1101 code on my code reader.

Hi and thanks for contacting Your Mechanic. The code P1101 means that the mass airflow sensor (MAF) is out of self-test range. Check to see if the clamps to the sensor are tight. A slight leak of air around the...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...