Q: How do I disarm the anti-theft system?

asked by on

How do I disarm the anti-theft system?

Disarming the anti-theft system can be accomplished in three easy steps: 1. Press the unlock button on the remote keyless entry (RKE) transmitter. 2. Place the key in the ignition, and turn the ignition to ON/RUN. 3. Wait 30 seconds.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I disarm the anti-theft system?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I delete a paired phone?

If you would like to delete one of the Bluetooth paired phones, you can do so very easily: 1. Turn on the infotainment system. 2. Press the CONFIG button. 3. Use the MENU/SEL knob to select Phone Settings or Bluetooth...

Q: Car alarm short

I’ll assume that you are speaking of an aftermarket alarm. There is a huge selection of alarms on the market and they all have different features for making the car more secure. Most have a starter interrupt relay. The start...

Q: When I turn my signal lights on. Why does my brake light goes out? I move it up and down they come back on. What can cause that?

Hi there. You may have something broken or worn inside the turn signal switch. I recommend replacing the turn signal switch. There also could be a loose ground near the brake lights that could be causing the lights to shut...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...