Q: How do I adjust the speed of the windshield wipers?

asked by on

How do I adjust the speed of the windshield wipers?

Depending on how heavy the rainfall is, you’ll want to adjust your windshield wiper speed. Doing so is easy. When you turn on the windshield wipers, they will be at a low speed. Turn the windshield wiper knob farther, and the speed will increase. Continue rotating the knob until the wipers are moving at the right speed for you, and for the weather.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the speed of the windshield wipers?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Leaking water from top of engine

This is most likely coolant leaking. There is a coolant outlet housing at the rear of the engine in the at the top of the block in the V. This is a possible area for the leak. A cooling system...

Q: How do I turn on the hazard lights in a 2012 Dodge Ram?

In the event of an emergency, you should always turn on your hazard lights. Your hazard light switch is placed in the instrument panel; press the button once to turn on your hazard lights, and a second time to turn...

Q: Q: How do I use the mist feature?

The mist feature activates the windshield wipers for one cycle, so that you can wipe away any mist or fog that has accrued on your windshield. To use the mist feature, do the following. Find the multifunction lever on...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...