Skip the auto shop - Our mechanics make house calls

Q: How do I adjust the power front seats?

asked by on

How do I adjust the power front seats?

The power front seats are controlled by the power switches on the outboard side of the seats, and can be adjusted in up to four different ways, depending on how your vehicle is equipped: 1. To move the seats horizontally, use the switch at the front of the controls. Push this switch forward to move the seat forward, or push it backward to move the seat backward. 2. To recline the seatback, use the switch that is second to the front. Push the switch forward to tilt the seatback forward, or push the switch backward to tilt the seatback backward. 3. If equipped, you can adjust the height of the seat with the switch at the front (the same switch that controls the horizontal adjustment). Lift the switch up to raise the seat, or push the switch down to lower the seat. 4. If equipped, you can adjust the lumbar support with the rear switch. Press the front of the switch to move the lumbar support forward, or press the back of the switch to move the lumbar support backward. Tips Before driving, always adjust your seat to the ideal position.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My air conditioner is not working , but my heater is , what can be the problem

Hello. Thank you for writing in. The A/C system and the heating system have relatively little to do with each other. They share a blower motor, and climate control switches. With the heater working we can assume that these components...

Q: Full power but no turn over when key is turned

Hey there, I believe you are correct. The most likely cause of this issue you are having would be the ignition switch. The ignition switch is responsible for sending power from the battery to the starter when you turn the...

Q: What conditions affect the operation of the Intelligent Key?

Your car’s Intelligent Key offers a very wide range of functionality. However, it works on radio waves. As such, there are plenty of different factors that can affect its operation. Understanding these can help you troubleshoot problems. Strong...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.