Q: Front wheel will not move after replacing the passenger lower control arm

asked by on

I just change the front passenger control arm and now the front tire won't move due to the brakes

You will need to remove the tire again to check to see if there is anything hitting the brake rotor causing the wheel to not move. Something was not reinstalled correctly.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Front wheel will not move after replacing the passenger lower control arm

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Brakes lock up when wet

This is a common issue with the ABS systems in many cars when the wheel speed sensors are going bad. All of the wheels on the car have wheel sensors that monitor the speed of the wheels and relay this...

Q: Can you do a front end alignment? 2005 Chrysler Sebring

Hi there - it sounds like you have damaged a tire or the wheel itself, and perhaps bent one of the suspension links with this impact. I would recommend a suspension inspection by a mobile, professional mechanic, such as one...

Q: Power steering, engine, and brakes quit, but lights work

A few different faults can cause the vehicle to stall out like this. The most common would be the ignition switch, battery, fuel pump, fuel filter, or battery cable. The brakes will work without the engine on but they loose...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.