Q: Q: Door not latching.

asked by on

The door will not close. The latch isn't catching.

The door seal is known to hit the trim panel on door closure. This can cause high effort to close the door. The fix is to remove the door seal and adjust the panel fold inward and reinstall the door seal. If this does not work then a replacement door seal with revised part number may be needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Door not latching.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Electrical problems and power surge?

Your voltage regulator is integral to your alternator assembly. If the battery is draining because the alternator is not maintaining the charge, the alternator or fuse is a good place to start looking. For further advice, you'll need to be...

Q: Q: Door latch

Unfortunately, you have done all that you can do without removing the door panel and accessing the lock assembly from the inside. It is likely that a release rod that connects your handle to the latch has come loose. There...

Q: Throttle suddenly goes out

Hi there, thank you for asking about your 2003 Mercedes-Benz S55 AMG. This is usually caused by a failing throttle body. The throttle motor or sensor fails and will cause this to occur. If the motor cannot move the throttle...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...