Q: Car starting up but won't stay running

asked by on December 27, 2017

My car starting but keep cutting off

My car has 200000 miles.
My car's transmission is unknown to me.

Car is stalling Inspection $94.99 - $114.99 Get a Quote

If the car is starting with no issue but the problem is immediate stalling typical causes for such immediate stalling are a faulty mass airflow sensor, faulty engine coolant temperature switch/sensor (typically at cold start only), faulty camshaft or crankshaft position sensors, worn spark plugs, wires or defective ignition coil(s), inadequate fuel delivery or pressure (clogged fuel filter, injectors, faulty fuel pump or pump circuit), contaminated or old gasoline, defective throttle position sensor, faulty idle air control valve, leaks in the EGR system, intake vacuum leaks, and so forth. If you request an engine stalling diagnostic the responding certified mechanic will get this resolved for you promptly. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does it mean if the Low Oil Pressure light on the dash is blinking?
Your dash holds a number of very important lights. The Low Oil Pressure indicator is one of the most essential. If this light comes on and flashes, it means there’s something very wrong and you need to take immediate action....
Ceramic brake pads squeaking
Many brake pads (https://www.yourmechanic.com/article/how-to-break-in-brake-pads) will make noise when installed. This is usually material noise that may or may not go away. One thing you could do that may help, is to lubricate the contact points on the brake pads. You'll...
hard brake pedal with engine off no pedal when started replaced all brakes rear clyinders and master cylinder no air in lines
From the description provided, my first step would be double checking the connections at the master cylinder as well as double check the flexible brake lines at each wheel. A small leak can duplicate the brake pedal falling to the...
side window came loose
In this situation the window may be able to be reattached. If the window is still in good condition it is completely possible that the part can be repaired and not need replacement. If you decide that you need some...
Car rattle noise in the middle of console - 2006 Chrysler 300
Hey there. I recommend having an expert drive the vehicle to verify the noise so the noise can be isolated to an engine or transaxle problem. With the symptoms you describe, a rattle that only happens over 40 mph may...
Can a loose gas cap or driving on really rough roads cause a P0193 error code?
Hi there, thanks for writing in. To answer your question in a simple way: maybe. The P-0193 OBD-II error code (https://www.yourmechanic.com/article/p0193-obd-ii-trouble-code-fuel-rail-pressure-sensor-circuit-high-input-by-jamahl-walker) is as you indicated, a fuel rail pressure sensor circuit issue. This may have been triggered by the aggressive...
When I turn on my headlights all my interior lights turn off like dash lights stereo and door buttons
The interior illumination through the head light dimmer control should be checked that the dimmer is turned to its brightest setting when the lights are on. If so then the light switch power supply for dimmer control needs replaced. If...
My acura wont excellrate after i changed the fuel pump
Hello, thank you for writing in. The vehicle may be having one of several issues. First, if you replaced the fuel filter (as should always be done when the fuel pump is changed), you need to make sure it is...
fuel mixture is lean. must be adjusted
I'm guessing that you are getting a P0171 code (https://www.yourmechanic.com/article/p0171-obd-ii-trouble-code-system-too-lean-bank-1-by-andrew-quinn) or something similar. Yes, its telling you that the engine is running too lean, but there is not an adjustment that you can make. When this happens it is because...

Related articles

A Buyer’s Guide to the 2012 Mitsubishi Eclipse
2012 2012 marks the end of an era for the Eclipse and Mitsubishi sends the sporty little car off in style. As affordable sports cars go, the Eclipse has served its segment well with stylish looks, respectable performance, and a...
A Buyer’s Guide to the 2012 Mitsubishi Outlander
The The smaller size and aggressive styling make the 2012 Mitsubishi Outlander a great choice for those who want an SUV, but don’t want to deal with some of the large behemoths available. With numerous tech options and all-wheel drive...
How to Get Mitsubishi Dealership Certified
Mitsubishi dealerships offer automotive technician jobs to mechanics who are ASE certified or have completed the UTI Automotive Technology program.