Looks like on the top back near the firewall on the motor...


Looks like on the top back near the firewall on the motor the park neutral safety switch broke how do I go about replacing that or can I fix it Mechanic's Assistant: How many miles are on the Cadillac? Is it an automatic o...

Looks like on the top back near the firewall on the motor the park neutral safety switch broke how do I go about replacing that or can I fix it Mechanic's Assistant: How many miles are on the Cadillac? Is it an automatic or a manual transmission? 06 DTS got the 9 then got about a hundred thirty thousand I do all my own mechanical work Mechanic's Assistant: Are you fixing your DTS yourself? What have you tried so far? I changed the battery replaced broken [radiator](/topics-radiator-cadillac/) hose near the firewall I must have f\*\*king broken it durinl Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No click won't turn over but I have power to everything else everything else works no [fuel pump](/topics-fuel-pump-cadillac/)

Automotive Expert
Hi! My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I **may** need to ask questions to find out basic information to help solve your specific problem. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. The neutral safety switch (internal mode switch) is located on the valve body. (see attached picture diagram/ #942). You have to remove the oil pan on the transmission to access the valve body so you can change it. My goal is to earn a 5 star rating experience. I hope that I have given you the information you needed. If you have any further questions about this concern, please feel free to reply back to me. If I’m not online at the time, I will respond ASAP when I get back. Thanks for being awesome and thank you for using JustAnswer!

What others are asking

Ignition tumbler stuck and needs replacement.
The tumblers are part of the ignition switch assembly on these vehicles. This part must be replaced as a unit. This particular part malfunctioning is a common problem on late 1990's Mercedes Benz products. Have a mechanic who is familiar...
Clutch not working
If the clutch had been slipping prior to the failure and now nothing happens, it may be worn out. Once the clutch wears, the mechanical connection between the engine and transmission is broken and power cannot be delivered. Have an...
Battery light on
Hello. If you continue to have a low voltage issue with the new alternator then there may be a circuit issue. Most of the time, if the alternator is good, it is the battery cables or there is an issue...
Fuel regulator 0 psi.
If the motor is running, there can't be 0 psi. I'm not sure how you are reading fuel pressure from the regulator. This is not a normal diagnostic procedure. Maybe you are referring to a fuel pressure gauge. And again,...
The clutch lever that the slave cylinder pushes is not pushing/springing back
It sounds like you may have to replace the clutch. Clutches can fail in a number of different ways and exhibit a multitude of symptoms. Most people are acquainted with clutches that slip from simple wear, but it sounds like...
I have a 2010 Camaro RS with an llt engine. How exactly would I take the thermostat housing off to replace the gasket & o-ring ?
The coolant pipe near thermostat cover will need to be removed for access to thermostat. If you have an aftermarket cold air intake plenum then you may have to remove upper and lower housing thermostat housing to get to the...
I have a 2007 buick rendezvous and everytime i put my right turn signal on my high beams come on. Is there a fix for this.
Hi there. Most of the time this type of problem is caused by an electrical short in the turn signal switch or steering column. I wouldn't say this is a very simple fix, due to the fact that locating the...
metallic smell from under dash after fuse blew out for interior lights
Smoke is worrisome as electrical faults do cause fires. Seems like you had smoke only so you are lucky. Obviously, don't put back a higher capacity (that is, "incorrect") fuse as such will allow too much current to flow on...
Car won't start I've put a new battery and have no volt drop from battery to cables
The voltage on the heavy cable at the starter should be equal to battery voltage unless you are cranking the engine at which time the voltage will momentarily drop. If you are not reading battery voltage on that cable, there...