Q: Advtrac came on and abs light how does this affect my car

asked by on

Advtrac light came on and abs can this affect my driving

My car has 175000 miles.
My car has an automatic transmission.

The AdvanceTrac warning light means that service is needed on your vehicle’s AdvanceTrac system. AdvanceTrac is an electronic stability control or "traction control" system and while the warning is displayed that safety feature may be unavailable, or may malfunction, in emergency driving, or during periods of low traction. However, to address your concern, so long as the vehicle is presently otherwise operating normally, it is safe to drive the vehicle. At your earliest convenience though, inasmuch as AdvanceTrac is an integral safety vehicle of the vehicle, do have the vehicle inspected and repaired. YourMechanic does offer AdvanceTrac/Traction Control diagnostics and repair and you can use the highlighted link to request and schedule service, right at your location. To give you an idea of possible faults that might be involved, and that might be the cause of the warning light, you could have: a faulty wheel-speed sensor, a faulty steering-angle sensor, a faulty rotational-speed sensor, an issue with the steering rack, foreign matter or debris lodged in one of the wheels, or the AdvanceTrac control system (computer) needs to be reprogrammed. If you request the AdvanceTrac/Traction Control diagnostic and repair service, the responding certified mechanic will get this taken care of for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Advtrac came on and abs light how does this affect my car

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Stuck in 4 wheel low

This is not a common problem and your vehicle may have a bad control motor that shifts the transfer case in and out of 4WD. You will need to have the system scanned to see if there are codes to...

Q: What are the signsof a bad tensioner pulley?

The most common cause of noise in the front of the motor having to do with the accessories is the tensioner and idler pulley bearings get noisey. I have also seen where the a/c compressor pulley bearing gets noisey. You...

Q: I have a 2004 Land Cruiser that is showing the following problems: (1) for the past several months, when I go to start it, it will

If the starter is not releasing from the flywheel, when you let go of the key, the starter likely has an internal fault. It is also possible that the circuit is not opening, as commanded, when you release the key....

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.