Popular questions

While most modern cars are equipped with power windows, many vehicles will have manual windows. To use, simply turn the hand crank on each door counterclockwise to lower and clockwise to raise the manual windows.

The repair will depend on whether the arm detached and as a consequence got damaged. Also, detachment of the arm if the vehicle is moving can potentially damage other parts such as the mounting boss(es) on the frame that the...

Coolant can leak from a variety of places. The system, when warm, is under pressure; 22 psi on your A4 Quattro. Even when the engine is at normal operating temperature, when a sudden leak occurs, it can “blow” everywhere. If...

Hi there. I would say that it may be drivable without the bumper functionally. However, depending on your state's vehicle code regulations, it may not be legal to drive without a bumper. I would check your state's laws regarding this...

Hi. The engine oil cooler uses engine coolant to cool the oil during operation. If you need further assistance, I recommend you have a certified technician, like one from YourMechanic, inspect the oil leak on your vehicle and suggest an...

First, the connection to the battery must be checked to make sure the terminals are clean and tight. A poor connection here can cause a long list of problems. Try again with a good connection and charged battery. If the...

Hi there. I have taught automotive technology and I can tell you that you can work while training in most programs. You will find that body repair and automotive repair are two separate programs. The automotive repair program, for the...

If you overfilled the oil the crankshaft could contact the oil in the pan and cause the oil to foam up and cause engine to suck in the aerated oil into the oil pump and this could cause bearings to...

A starter like any other mechanical and electrical part is subject to failing sometimes for no apparent reason. However, sometimes this is misdiagnosed as well and often times mistaken for something much more simple like a fuse or starter relay....

Hello - the P0335 problem code you extracted indicates a crank position was not detected. This usually means the crankshaft position sensor has failed, which will cause the sudden stall you experienced, but can also mean the electrical system voltage...

You will need to have the burning smell checked to see if you have oil leaks. The gas gauge not working is most likely the fuel sender in the fuel tank is not working correctly and will need to be...

Yes, that sounds about right. The price for a fuel pump and connector to the pump is normal for your Chevrolet Cobalt. The gas cap is a common problem also. Best of luck.

I would have the knocking sound investigated and resolved first because it may be engine related and thus a priority. The relevant service to request is an engine noise diagnostic. Vibration felt in the steering wheel is usually tire and/or...

Hi there. Ambient temperature can affect any number of electrical components. There could be a poor electrical connection in the power distribution center. The fact that the check engine light is not coming on once the engine does start leads...

Hi there. It sounds like you have several concerns with the vehicle; we'll stick to the first one that was mentioned. It sounds like there could be an internal fault in the transmission; whether this is a mechanical or electrical,...

You may be having clutch slippage that is causing the RPM to flare up until it grabs. I recommend having a mechanic road test the vehicle to diagnose the slipping and verify whether you are in need of a clutch...

Tires should be rotated about every 5,000 to 7,500 miles, or at every oil change which is typically within that mileage range. Tires generally should not be left in service on a car for more than 10 years after the...

Hi there. Sounds to me that you are experiencing 1 of 2 things. Either you have a faulty ignition cylinder, or your "Park" setting is not fully engaging. I would recommend having a certified mechanic diagnose your key not turning...

You could have a bent rim or a bent hub. I would have the rim and hub checked to see which one is bent. I would recommend having a mechanic, like the certified ones at YourMechanic, come and check it...

Hello. From what you describe it would appear that your vehicle is in some sort of limp mode. If the computer detects a serious issue with the engine management or transmission system it will put the vehicle in a power...

Hello. The stopper assembly is an essential, required part (the "stopper" is not a cosmetic cover). If the vibration started after you installed the aftermarket mount, the cause of the vibration is the aftermarket mount and you should remove it....

Seventy degrees C (160 degrees F) is too low for optimal engine efficiency and may cause oil contamination and reduced engine life. You will get lower gas mileage, too. The cause of the sub-normal temperature is the extended fan operation...

It's easy, your catch can isn't going to stop it, so when you put that on you don't have to worry. But to clean it now, all you have to do is take off any big vacuum on the intake...