Q: How do I control the air flow mode selection?

asked by on

How do I control the air flow mode selection?

Your climate controls have three different air flow modes: face level (air is directed towards the face), floor level (air is directed towards the feet), bi-level (air is directed towards both the feet and the face), floor/defrost level (air is directed towards the feed and the windshield), and defrost level (air is directed towards the windshield). To switch to any of these air flow modes, press the corresponding button on the climate controls.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I control the air flow mode selection?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I turn on the defogging logic feature with the automatic climate control system?

The defogging logic feature automatically controls the air intake to keep the window from fogging up. To set the defogging logic system, follow these steps: 1. Turn the ignition to the ON position. 2. Press the Defrost button. 3. Press...

Q: Q: Ac cuts off after a while

While the engine is running and the air conditioning system is commanded on, both cooling fans in the assembly should be powered on. The vehicle will turn the air conditioning compressor on and off depending on the system load in...

Q: P0507 idle code

The code P0507 is for a problem with the idle control valve. If all other checks are good with vacuum leaks and inlet air tubes then you may need to replace the idle control valve.

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.