Q: RPM problem - 2009 Toyota Land Cruiser

asked by on September 27, 2016

After starting to drive in gear 3 or 4, RPM gauge go up around 3500 then go down again to normal (2000 rpm).

I need to know if this problem from clutch or anything else

My car has 100000 miles.
My car has a manual transmission.

Gears slipping when accelerating Inspection $94.99 - $114.99 Get a Quote

You may be having clutch slippage that is causing the RPM to flare up until it grabs. I recommend having a mechanic road test the vehicle to diagnose the slipping and verify whether you are in need of a clutch replacement.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do you store just one phone number from your phone in the HandsFreeLink?
While you can import entire phonebooks (on some phones) into the HandsFreeLink® (HFL) system, you can also add specific names and numbers if you want. This is handy if you only want to store a few close friends and family...
Knocking from front end.
This could be a lot of things from the sway bar links to the control arm bushings. I suggest you have your vehicle inspected and repaired by a trained professional, like one from YourMechanic. They will be able to hear...
my car dont shift in high gears, but the transmission is good.
Hello. There are quite a few different parts that can cause this. It can be a transmission speed sensor, but a bad or defective throttle sensor can also cause this. If this started right after the throttle sensor was replaced,...
Car cutting off
I would need more information on what repairs were performed to be able to give a more full answer. But by cutting off, I am assuming the car stops running. This could be be caused by a few things, such...
Is the catalytic converter clogged if it starts and runs but rattles kind of when it starts and doesn't accelerate very well?
This is a common description of a clogged catalytic converter. If it is the catalytic converter that is rattling, that means the honeycomb lattice inside the cat has come loose. However, this doesn't mean the cat is clogged, but it...
My Boat motor repair issue
Hi there. Unfortunately, we do not provide services or repair advice for off-road vehicles or mechanical components. You might be better served to contact a powersports or off-shore mechanical repair shop.
Crankshaftpositionsensor
A failed crankshaft position sensor can cause symptoms like this. When you crank the engine, the engine control unit looks for a signal from the crankshaft position sensor to determine where each cylinder is. When the signal is received, the...
Question about buying radiator for 1999 ford ranger v4 2.5l
Hi Javier. Thanks for the question today. In cases like this, you want to replace what you currently have active, as it's possible that the previous owner has removed the OEM transmission cooler, which may be the reason for the...

Related articles

How Long Does a Clutch Last?
It’s a fact of life that a car clutch will almost certainly wear out before your car does. That’s because, even...
The Best Used Cars to Buy If You're a Gardener or Landscape Architect
Gardeners Gardeners and landscape architects need to haul around quite a bit of gear. As a gardener, chances are you will need to transport a variety of mowing equipment, along with smaller implements. You may also need to move shrubs,...
The Top 5 Selling Cars in Alabama in 2012
2012 2012 was a great year in Alabama for auto manufacturing, but that wasn’t the only bright spot. Vehicle sales in Alabama were also robust in 2012. Nothing much changed in terms of the vehicle types that were most popular...