Q: Lights

asked by on February 28, 2017

the lights that are used when the door is not open will not turn off

Depending on the vehicle you have you may just have the interior light control switch turned on at the headlight combination switch. You may also have a more serious problem like a bad lighting control module shorted and keeping the lights on. If it is not a simple solution then have a mechanic like one from YourMechanic come and do a check and diagnose the problem for you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

every few days i have to jump start my car

Hello. Yes a bad starter could cause a car to need a jump start every few days. Additional power provided by an extra battery could be enough to get a weakening started going again. Your vehicle may have a battery...

Dome lights and courtesy lights in back seat will not turn on.

Hi there. When multiple objects in a car will not work that are electrical, then there is a loose or broken ground wire to the circuits. Check all of the wiring in the cab to see what could be loose...

Interior lights won't turn off

Hello. It sounds like you may have a short in your electrical system somewhere. I would recommend having your electrical system inspected by a qualified professional in order to determine where the short is located. This will include loading up...

Related articles

The Best Tool to Diagnose Sensor Failures
Mechanics may regularly run into sensor failures when performing a repair service. Automotive oscilloscopes help properly diagnose these issues.
The Guide To Colored Curb Zones in Indiana
Indiana Indiana parking laws: understanding the basics When driving on the roads of Indiana, abiding by the laws and regulations of the road is par for the course. However, drivers also need to make sure they abide by the laws...
B1210 OBD-II Trouble Code: EIC Switch-2 Assembly Circuit Open
B1210 means there is an incomplete electrical circuit in the electronic instrument cluster (EIC), likely due to a circuit issue or faulty component.