Q: Is my 2011 Peugeot 508 have timing belt or a chain belt

Four-wheel drive is one of the best ways to ensure safety and efficient vehicle operation in less than ideal conditions. Whether you’re driving on a gravel and dirt road , driving in inclement weather, or simply in tow, four-wheel drive...

After checking the wiring diagrams for the horn and antitheft system for your car I do not see where they connect in any way. I do not think the vehicle is equipped to sound the horn if you have the...

If the rear passenger side wheel speed sensor is reading 0 mph, when the other wheels read 10 mph, you already have done most of the diagnosis. The sensor reading depends on the sensor wheel located inside of the rear...

Usually when the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) flashes, it is an indication that you have a severe misfire (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) that may cause damage to the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement). Most of the time this is due to failing ignition components. That...

If the brake caliper is sticking due to the piston binding in the caliper then it should be replaced. Raise and support the vehicle, remove the tire, and disconnect the brake line attached to the caliper. Remove the caliper attachment...

Hi there - yes, your truck is safe to drive. However, the failure of the steering wheel position sensor will eliminate suspension stability control and traction control functions, so be more cautious in slippery conditions. I would recommend replacement of...

You may not have an O2 sensor problem at all. I would need to know the codes and problems you are having to give a complete diagnosis. I would suspect you are getting codes like P0171 or P0174. These are...

If the starter motor itself is not functioning (i.e., no engine cranking), then the starter circuit has to be diagnosed. If the starter motor is functioning, but the car is not starting, you could have a circumstance where the fuel...

Hi Jesus. Thanks for sending in your question. The P0128 code means that the engine coolant is not getting warm enough, fast enough. In other words, there is a problem with the engine operating temperature not being reached within a...