Q: I changed the crankcase vent tube, now the transmission won't shift

asked by on November 10, 2016

replaced starter and the crankcase vent tube now the transmission wont shift at all it goes into drive & refurse fine just wont shift

My car has 125000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Kia sportage wont start

What you are describing sounds like a faulty starter solenoid. A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity...

Truck won't shift out of first gear - 1979 Chevrolet C10

Hello. There are several possibilities here: the vacuum modulator valve, the governor in the transmission, or possibly incorrect fluid level in the transmission. If you would like to have this checked, a qualified professional from YourMechanic can come to your...

Car overheating due to nonworking fan

The fan on your vehicle is an electric fan. It comes on as needed to help cool the radiator when the coolant reaches a pre-determined temperature. This is usually around 220 degrees. Fan motor failure is common and not a...

My car will not start. I changed the head gasket an now it will not start.

If your car was not running and a computer update got it running but the engine would shut off so you did a tuneup, brakes and a head gasket. You might have problems with the installation of the head...

Car makes big click sound when coming to a stop.

The noise you are hearing could be coming from a variety of components. Your first step is to try and isolate the noise and figure out where it's coming from. You're going to want to see if you can isolate...

Car has little vibration. I wonder that is problem cause of power steering wheel fluid or other reason.

Hello. If you have a vibration in the steering, it more than likely has nothing to do with the power steering fluid. The pump would make noise if it needed the fluid also. If it vibrates when hitting the brakes,...

After putting a new alternator in why would my car start jerking while trying accelerate?

If you disconnected the battery during alternator replacement, you might have lost some of the initial settings in the car's controllers. If that's the case, things should start working better after you have driven the car a few times and...

Advice on using Lucas products

Hello there, thanks for writing in about your 1993 Chrysler LeBaron V6-3.0L. You are correct that fuel can gum up and the oil can form a varnish which coats parts of the engine over time. The best method for cleaning...

Cannot shift gears

Sounds like you are having slave cylinder issues. The slave cylinder is a hydraulic component that pushes the clutch lever when you step on the pedal. If the slave develops a leak, the pedal will go to the floor. This...

Related articles

A Buyer’s Guide to the 2012 BMW Z4
BMW’s BMW’s entry in the hardtop roadster segment, the Z4 delivers the ideal combination of performance, looks, and standard comfort features. This two seater is not only classically stylish and heavy on extras that aren’t, well, extra, it’s also the...
The Most Common Error Codes for Transmission Problems
If your Check Engine Light has come on, there are a number of conditions that could be causing it. Many are related...
Top 10 Factors to Consider When Buying a Luxury Car
The The idea of owning a luxury car is appealing. The glossy paint, swoopy lines, and prestigious badges speak of the owner’s success in life, while the interior opulence offers scented leather surfaces, high-tech telematic devices, and all the creature-comfort...