Q: How do you unlock the doors with the remote?

asked by on

How do you unlock the doors with the remote?

While your Intelligent Key will remotely unlock the doors when you get close enough, you can also use the fob as a remote keyless entry system from a greater distance away. To unlock the doors, just follow these steps:

  1. Make sure you’re no farther than 33 feet from the car.

  2. Press the unlock button once. This unlocks the driver’s door.

  3. Press the unlock button twice in quick succession to unlock all the doors.

Tip

Open a door within a minute of unlocking them to prevent them from automatically locking again.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do you unlock the doors with the remote?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Remote and windshield issues

If you can lock and unlock the door using the driver's door switch but not the remote, then you may have a remote communication issue. If pushing the unlock button twice does not unlock the door, then your lock's module...

Q: Wireless key have good batteries, central lock work very good but suddenly the two wireless keys stop working 2006 Toyota RAV4

Hi there - if both of the known good keys stop working, it is likely the key transceiver in the vehicle has stopped working for some reason. Check for blown fuses, just in case. The Toyota security system software (next...

Q: Cranks but doesn't start and also I don't see the rpm move when I try to start, what should I do? - 2002 Nissan Altima

Hello - I suspect your crankshaft position sensorhas failed. This sensor provides the ignition system with timing information - when to fire each spark plug. This sensor is also the trigger for the tachometer, since it is counting engine revolutions...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.