Q: How do you shift gears in the D position?

Removing the key from the ignition switch is very easy. First, if your vehicle has an automatic transmission, make sure that it is in PARK. Then, turn your key fob counter-clockwise to the farthest setting, OFF. Then pull the key...

Fuel supply to the carburetor needs to be checked. The fuel system including the fuel pump and filter will need to inspected is there is no supply at the carburetor. The carburetor may need to be checked for filling as...

If you are referring to P0320 - Ignition/Distributor Engine Speed Input Circuit code, then the most common cause of the problem is the crankshaft position sensor. This sensor controls ignition timing of the engine and when it fails the computer...

Hello there, issues like this are very uncommon. When the vehicle does not stop like this it obviously makes the vehicle unsafe to drive and is a cause for concern. The most likely causes of this would be something obstructing...

Hello. If the spark plug and the coil have been replaced, then a compression test (https://www.yourmechanic.com/article/how-to-do-a-compression-test-by-robert-tomashek) needs to be done. It is common for the valve seat to fail and cause this. When it fails, it causes low compression which...

If the pump works when you power it directly, that is when you bypass the vehicle wiring, that's good. All you have to do then is troubleshoot the vehicle wiring (relay, fuses, and so forth). The fastest way to do...

Hi Christina. Thanks for contacting us tonight. Most of the time, a vibration like you are describing is caused by either a loose vacuum line or a worn out engine mount. With your vehicle being 2011, it's quite possible the...

The N80 valve is a "purge valve" located on top of the engine. It is a very simple component in the EVAP system and indeed you can easily replace it yourself. The only way to ensure that the N80 valve...