Q: How do I use the rear wiper?

asked by on

How do I use the rear wiper?

The rear wiper is used on the rear window, and helps increase your visibility. To turn on the rear wiper, rotate the rear wiper switch on the wiper lever to either the On or the INT setting. When turned on, the wiper will run continuously. When turned to INT, the wiper will run intermittently.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the rear wiper?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Wipers can’t keep up with the weather

The windshield wiper motors on the Kia Soul are not strong enough to remove heavy snow from the windshield. Unfortunately, there are no fixes for this problem as of yet. There have been some complaints to the National Highway Safety...

Q: turbo noise on all acceleration, and also a chirping noise on idle. Worse after went to dealer and they say they did nothing.

You will need to check the intake tubes between the air filter and throttle body to see if you have any loose plastic intake tubes. If any are loose or off will cause turbo noise with loss of power. ...

Q: Q: How do I operate the moon roof?

Your truck comes with a Moon roof built into the roof. This window can be opened and closed just like any other window. To operate the moon roof. Press the Slide button to open the moon roof. Pull the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.