Skip the auto shop - Our mechanics make house calls

Q: How do I turn on the emergency flashers?

asked by on

How do I turn on the emergency flashers?

You will want to turn on the emergency flashers for your vehicle if it stops working or if you’re in an accident.

  1. Locate the switch with a triangle on it on the front of your display area. Press the switch.

  2. Press the switch a second time to shut off the flashers.

Tip

You can tell the flashers are on from inside the car by noticing if both signal arrows are flashing.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I turn on the emergency flashers?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I reset the Uconnect phone system?

If you would like to delete all of the data and reset your Ucconect phone system, you can do so easily with these steps. Press the Uconnect phone button, located on the steering wheel or the center console. When...

Q: How long can I drive if the bearings in the water pump is making noise? car is not over heating and there are no leaks

Hi there. It's not recommended to drive a vehicle with a damaged water pump; especially if the bearings are damaged. If the water pump fails while you are driving, it's possible your engine will suffer serious damage.

Q: Blinkers occasionally work

If the blinker comes on when you hit the dash I believe your hazard switch may be bad. The contacts on the hazard switch fail when they get hot and the heater is running. It appears to be a common...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.