Q: How do I reset the factory settings?

asked by on

How do I reset the factory settings?

When the system reset is used, then your cars adjustable settings will be returned to the factory settings. To perform this command, follow these steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed, then press the OK button. 2. Press the Up/Down buttons until System Reset is displayed, then press the OK button. 3. Press and hold the OK button.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I reset the factory settings?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car cranking but not starting.

This vehicle engine and year has more than one possible failure for this complaint and no one stands out more than the fuel pump in the fuel tank. It is also possible that it could be could be a crank...

Q: How do I turn off the traction control?

The traction control helps you maintain full control of your vehicle in adverse weather conditions, by transferring power to the wheels with better traction. You can turn off the traction control, which can help you move your car if it...

Q: Startup problems, no dashboard lights but the headlights and radio are on

A faulty ignition could cause an issue where some systems receive "key on" power and others do not. If the vehicle is not starting with all dash lights and systems operational it could be an issue with the immobilizer circuit....

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.