Q: Q: How do I flash the high beams?

asked by on

How do I flash the high beams?

You can flash the high beams to get someone’s attention, or to alert other drivers. To do so pull the turn signal lever towards you, and then release it. The high beams will flash on and then off, and the lever will return to its original position.

Tip

The high beam flash feature can be used even when the headlights are off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I flash the high beams?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I expand the display?

The CD display can only show 12 characters at a time. If the display has more than 12 characters to display, press and hold the Text button for at least one second to show the rest of the characters.

Q: Intermittent failure to start.

Check the starting of the vehicle in park and in neutral. If the vehicle starts all the time in neutral, then the neutral safety switch needs replaced. If the engine does not start every time on whether the transmission is...

Q: What Kind of Dash Light Bulbs Do Cars Use?

Dash lights use different types of bulbs to illuminate the dash display, warning indicators, and gauges. These bulbs are traditionally a sealed, small element, single filament bulbs of varying sizes depending on the amount of illumination required for the gauge,...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...