Q: How do I change the auto door lock settings?

asked by on

How do I change the auto door lock settings?

Your vehicle can automatically lock the doors when you are driving, for added safety. You can use the multi-information display to customize if you would like the doors to automatically lock when the vehicle is moving at a significant speed, or instead have them lock when the car is shifted out of P (Park). You can also turn off the auto door lock mode. To choose your adjustment, follow these steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Door Setup, then press Source. 5. Use the +/- buttons to highlight Auto Door Lock, then press Source. 6. Use the +/- buttons to choose between Off, With Vehicle Speed, and Shift from P, then press Source.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I change the auto door lock settings?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: battery very good but wont start.

When you are having the no crank condition, the system will need to have the starter tested to see if it is getting power from the ignition system to operate it. I have seen the starter not work and also...

Q: What does the chime and buzz mean?

During certain circumstances, the car’s interior will chime while the exterior buzzes. If so, the Intelligent Key has detected a problem. This can happen for four reasons: 1. The transmission has not been set to the P position. 2. The...

Q: How do I move the rear outer head restraints?

The rear outer head restraints cannot be removed, or adjusted in height, but they can be folded down. To fold them down, pull the strap next to the restraint until it folds down. The restraint can be returned to its...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.