Q: Q: How do I adjust the rearview mirror?

asked by on

How do I adjust the rearview mirror?

The rearview mirror is an extremely important safety feature that provides you with visibility through your rear window. Before driving, you should always adjust your rearview mirror so that you have maximum visibility. You can adjust the mirror manually, by using your hand to move the mirror into the ideal location.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I adjust the rearview mirror?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: low oil pressure light is on and loud engine knocking

Hi Dominic. Thanks for submitting your question today. When you have a loud engine noise that is followed by a low oil light or any oil light, it's often related. When the oil pressure is low or oil level is...

Q: How do I turn on the power mirror defoggers?

If your Accord is equipped with power mirror defoggers, these can be used to quickly defrost your mirrors on winter mornings. To activate them, just do the following: Turn the key to on. Locate the Mirror Defogger button on...

Q: car dies while driving after getting warm, starts up after 20-30 minutes.

Unfortunately finding the root cause of intermittent problems can be difficult. Especially if the vehicle must be driven until it is hot before it shuts down. Something that may be worth a try is to allow the vehicle to sit...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.