Skip the auto shop - Our mechanics make house calls

Q: Car leaking and overheating

asked by on

The car is leaking antifreeze and started to overheat. I am sure it is radiator related.

A: If your radiator is leaking, it will cause ...

If your radiator is leaking, it will cause your car to eventually overheat. If left for too long, major engine damage could occur. I recommend making an appointment with a mechanic, such as one from YourMechanic.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Starts but won't stay running

This may be caused by many different things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty Oxygen sensor or a dirty or failing idle air control valve. Any of...

Q: The factory stereo connector was cut and I need to install a new connector.

Hi there. Look at the wiring on the harness and look at the new connector. Make sure that there are the same amount of wires on the connector and on the harness. Then check the wires. There should be a...

Q: Can I replace a leaky radiator with a used one or should I get a new Ford radiator?

Hey there, thanks for writing in about your 2008 Ford F-350. I would check to see if the radiator is available aftermarket first. I would not go with a used one, since you never know what you will get. If...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.