Q: Bank 1 air fuel imbalance alarm car is misfire after it gets hot ok up till that time

asked by on

Bank 1 air fuel imbalance alarm car is misfire after it gets hot ok up till that time

Hi there. Check the spark plugs and see if the plugs have a good bold spark. If the plugs are not sparking, then either the plugs are fouled out or the ignition coils are not energizing. Check the fuel injectors and see if they are working. Remove one injector harness at a time on the engine and see if the engine hesitates even more. If the engine begins to shake, then the injector is working. If there is no change to the engine, then the injector may not be working or the cylinder could have an issue. If the spark plugs and fuel injectors are working, then check the compression on the cylinders and see if there is 150 psi or more. If a cylinder is 120 psi or less, then there is an issue with the cylinder, like the rings not sealing, the valves not sealing or burned, or the head gasket could be burned. If you need further assistance with diagnosing your misfire, then seek out a professional, such as one from Your Mechanic, to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Bank 1 air fuel imbalance alarm car is misfire after it gets hot ok up till that time

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Random misfire on cylinder one - 2000 Chevrolet Corvette

Hello. Random misfires can be caused by a few different things. If the coil packs are all good then it may be possible that the issue is not related to the ignition system. A few other things that can cause...

Q: Q: Won't stay running

Hello and thank you for your question. It seems to be the transmission that is causing the engine to stall out when you are putting the vehicle into drive. The transmission could have a converter clutch lock up issue causing...

Q: EGR code and Cylinder number 4 misfire detected.

Hi there. The Exhaust Gas Recirculation (EGR) valve may be the wrong one or the cheap design could be not designed for the emissions requirements for U.S. standards. If the EGR is pulling from cylinder number 4 and after replacing...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...