Q: Any ideas?
To my above posted question about my car.
My car has an automatic transmission.
Unfortunately, there is no question here to answer. If you have a question that you would like answered by a qualified professional, please visit yourmechanic.com and click on the ask a mechanic link to ask your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do you replace a fog light bulb?
If your car is equipped with fog lights (not all Civics have these), they provide you with enhanced visibility when driving in foggy or misty conditions. However, like all other bulbs on your car, they’ll eventually burn out and need...
Engine not cranking.
The starter may be defective or the ignition switch may be the issue. The system would need to be checked (https://www.yourmechanic.com/services/car-is-not-starting-inspection) by a qualified mechanic to trace the problem down.
Car won't start after ECM modular replacement
You did not say why the ECU was diagnosed, but the ECU would need to be programed to your specific vehicle by a dealership. If the ECU did not fix whatever issue prompted the replacement, then the car will not...
Spark plug covered in oil
A fouled spark plug is a common issue with modern vehicles. Thinner oils are used to reduce friction and increase fuel economy. These thin oils in combination with a vehicle with higher mileage will cause oil to seep past the...
Back doors not opening
If the locks do not operate for the back doors, I would suspect a blown fuse. Otherwise, the master switch in the driver's door may have to be replaced. A diagnostic is required to determine the exact issue with your...
Check engine light code P0420
You may have a purge valve that is leaking and causing excessive fumes to enter the intake manifold during the refuel process. When you start the vehicle, the excessive rich mixture may be causing the catalyst to overheat which will...
ignition control module keeps failing
This could be either the ignition control module or the ECM which gives direction to the ignition control module. I would start by checking the power supply to the ignition control module to see if it is receiving any power...
V6 motors
Hi there. Many factors will impact fuel economy and efficiency on any gasoline or diesel powered vehicle. Driving "slow" isn't always as vital to fuel economy. However, what is important is being smooth with the acceleration. The allure of "quick...
broke small wire going to alternator.
The small wire that you broke off is the wire that goes to the computer of the vehicle. The computer controls the charging and you may need to have the computer scanned and any codes diagnosed for the charging system....
Related articles
P0275 OBD-II Trouble Code: Cylinder 5 Contribution/Balance Fault
P0275 means that there is something is wrong with the way the fifth cylinder is processing fuel due to the fuel injector.
10 Best Stores to Buy Auto Parts in Santa Fe, New Mexico
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Santa Fe is Hal Burns Truck & Equipment
How to Replace an Anti-Lock Brake System (ABS) Fuse or Relay on Most Cars
Anti-lock brake systems have a fuse that fails if the ABS brake light is on or when the fuse is blown. The wheels may lock up if the ABS fuse is bad.
Browse other content
Services
Maintenance