Ram ProMaster 1500 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(26)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(26)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Ram ProMaster 1500 Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Ram ProMaster 1500L4-3.0L Turbo DieselService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2019 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Ram ProMaster 1500L4-3.0L Turbo DieselService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2016 Ram ProMaster 1500V6-3.6LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ram ProMaster 1500 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Ram ProMaster 1500 V6-3.6L - Car AC Repair - Wheat Ridge, Colorado
Thank you for taking care of my promaster

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Ram ProMaster 1500 V6-3.6L - Check Engine Light is on Inspection - Austin, Texas
Knowledgeable of check engine light problems.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Ram ProMaster 1500 V6-3.6L - Check Engine Light is on - South San Francisco, California
On time, knowledgeable

Bryant

12 years of experience
600 reviews
Bryant
12 years of experience
Ram ProMaster 1500 V6-3.6L - Brake Pads Replacement (Front) - Indianapolis, Indiana
Very attentive to what needs done. Very detail oriented.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1
Number of Ram ProMaster 1500 services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Clean Plastic Car Parts
Your Your car is made of several types of materials, though most of the parts that are for aesthetics are plastic. Plastic is used because it is easily molded to a desired shape and can be tinted to match the...
How to Replace a Headliner
As As your car ages, there is probably nothing more annoying than a sagging headliner. But a vehicle doesn’t necessarily have to be old for the ceiling fabric and foam to start to deteriorate. Faulty headliner installations are a problem...
How to Get the Best Price for Your Trade-In Car
When When you are shopping for a new car, there is a good chance you have a vehicle that you need to get rid of before you can purchase the new one. You can either sell the car privately (https://www.yourmechanic.com/article/how-to-get-the-highest-resale-value-for-your-car)...

Engine Burning Oil

If the engine did not have excessive oil consumption prior to the repair, the rings are not likely to presently be the cause of excessive oil consumption unless you have somehow ruined the rings "overnight". There are two principal possibilities....

I need brake caliper mounting bolt torque and guide pin torque for 2011 lacrosse. Front and rear brakes

According to GM, the Front caliper pin bolts are 70 ft lbs and the bracket bolts are133 ft. lbs. The rear caliper bolts are 25 lbs ft and the bracket bolts are 89 ft. lbs.

Shifter lever will not move

The clutch must be functioning to shift the gears, that is you must be able to activate the release lever (hydraulically in your case) to disengage the pressure plate, and thence friction material, from the flywheel. Once you are able...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com