Ford Freestar Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(89)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(89)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Ford Freestar Brake Master Cylinder Replacement is $274 with $122 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Ford FreestarV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$427.86Shop/Dealer Price$504.84 - $699.75
2004 Ford FreestarV6-4.2LService typeBrake Master Cylinder ReplacementEstimate$507.16Shop/Dealer Price$611.99 - $890.40
2006 Ford FreestarV6-4.2LService typeBrake Master Cylinder ReplacementEstimate$395.86Shop/Dealer Price$472.86 - $667.79
2005 Ford FreestarV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$507.16Shop/Dealer Price$611.95 - $890.33
2007 Ford FreestarV6-4.2LService typeBrake Master Cylinder ReplacementEstimate$395.86Shop/Dealer Price$472.89 - $667.84
2004 Ford FreestarV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$507.16Shop/Dealer Price$611.99 - $890.39
2007 Ford FreestarV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$403.86Shop/Dealer Price$480.64 - $675.41
2005 Ford FreestarV6-4.2LService typeBrake Master Cylinder ReplacementEstimate$515.16Shop/Dealer Price$620.37 - $899.06
Show example Ford Freestar Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(89)

Rating Summary
81
3
1
2
2
81
3
1
2
2

Jasmine

23 years of experience
102 reviews
Jasmine
23 years of experience
Ford Freestar V6-3.9L - Car is making a noise - Milwaukee, Wisconsin
Jasmine is always very knowledgeable and prompt.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Ford Freestar V6-4.2L - ABS Light is on - Woodstock, Georgia
Thanks Michael for your excellent service!

Tabitha

17 years of experience
319 reviews
Tabitha
17 years of experience
Ford Freestar V6-3.9L - Spark Plugs - San Diego, California
Tabitha was great, she has the car fixed and running, did not take her long at all very happy with.

Rohon

48 years of experience
59 reviews
Rohon
48 years of experience
Ford Freestar V6-4.2L - Battery will not hold a charge - Saint Albans, New York
very professional which provided a measure of trust and confidence a customer would want to have in a mechanic

Excellent Rating

(89)

Rating Summary
81
3
1
2
2
81
3
1
2
2
Number of Ford Freestar services completed
979+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Does Ignition Timing Mean?
Timing Timing – it has a couple of different meanings when applied to your car’s engine. One of the most critical is ignition timing (not to be confused with engine timing). Ignition timing refers to when spark is created during...
Symptoms of a Bad or Failing Ignition Lock Cylinder
Common signs include the car not starting, the key getting stuck in the ignition or not going in, and issues power on the vehicle.
Symptoms of Bad or Failing Points & Condenser
If your vehicle runs rough, the engine will not fire, or the vehicle will not start at all, the points and condenser system may be failing.

How do I set my headlights to go on automatically?

Hi. If the car is equipped with automatic headlights, then the head light switch will have an AUTO setting on the switch. If this setting is located on your light switch, then all you have to do is put the...

Hi My Toyota Prius starts shaking on acceleration

HI there. Usually cleaning the MAF sensor is done with an aerosol cleaner like brake cleaner or carburetor cleaner. These have alcohols, so cleaning the sensor the way you did should not have an impact. In most cases, the type...

2009 nissan maxima sv 3.5l code p0463

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com