Hi. I would recommend to have a technician check for any loose power or ground wiring. There also could be some corrosion present that is blocking the electrical current flow. I also recommend that the technician use a test light to...
Hi there. Unfortunately, the pocket scanner won't help us diagnose this clicking noise for you. In order to correctly diagnose this issue, a professional mobile mechanic would have to complete an OBD-II diagnostic test with a digital scanner that would...
Hello! We will be happy to help. I believe the problem that you are describing is a normal driving pattern. In your particular vehicle Lexus/Toyota implemented a system called Artificial Intelligence Shift Patterning. It is consisted of many sensors which...
Hi. It sounds to me like your battery ran out of juice. It's most likely that the battery inside your key died and simply needs replacement. When your battery dies in your key you should be able to start your...
Your navigation system will likely have to be replaced as the system is non serviceable. This issue will require dealer level diagnostic equipment to diagnose the issue and to reprogram a new unit if necessary.
Hi Phoebe. Thanks for contacting us today. When the oxygen sensors have readings that are similar to each other, it is an indication that the catalytic converter is not working as intended. If the voltage of the downstream oxygen sensor...
You should have the theft system checked to see if it is activated first and then have a mechanic like one from YourMechanic test the battery and starter circuit for you. The problem sounds like the battery is low on...
Hi. It should be a fairly simple cause. I suggest checking your tires for uneven wear because that is the number one cause of pulling next to an alignment being out up specifications. So have the alignment checked (https://www.yourmechanic.com/article/how-to-know-if-you-need-a-wheel-alignment-by-robert-tomashek) as...
Hello! I believe the problem you are having may be to do with the electric steering system. I would suggest having that checked out by a capable technician. Also you mentioned that the alignment has been done. Compare the readings...
