Q: What locations do you think will be approved ?

asked by on May 08, 2017

Places I might can go

It is up to you to get approval from the location where you want the services done and let the location owner know what will be done. I have done services at many different locations and have been stopped in the middle of a service when no pre authorization was made by the customer.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Car is chugging at low speeds and then stalls when I stop.

This may be related to a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at...

Car shaking and stalling

Hi. There are a lot of issues that could cause the symptoms you are having. One guess is that you may have a vacuum leak. A vacuum leak is basically unmetered air that enters the engine, disrupting the air/fuel ration....

My truck has a loud ticking sound sometimes goes away when warm.

Hello, What you are describing sounds like the noise associated with hydraulic lifters which are a part of the valve train. In the mornings or when the engine is cold, the oil has had the chance, due to gravity to...

Engine died and will only run for a few seconds

Hi there! To determine if the fuel lines are clogged I would suggest performing a fuel pressure test. This test will tell you the engine is receiving the proper amount of fuel. If it is not, you should first check...

2009 Ford Focus manual Trans.drivetrain light comes on ? Why

Hi Jeff. Thanks for the question today. Warning lights are triggered when a sensor detects an error and creates an OBD-II trouble code then stores it in the ECU. The wrench light typically indicates that routine service or maintenance is...

Just put new alternater on but battery not charging

The alternator in your car charges your battery with the assistance from the voltage regulator which is something that regulates the amount of voltage being sent to the battery via the charging from the alternator. It's function is to not...

Leak from Manifold

You are correct. The most likely cause of an intake manifold leak, is gasket failure. These gaskets fail for a number of reasons and can be swapped out in a day. The majority of the process is removing the manifold...

Po741 code

Check to be sure that the transmission fluid level is correct, especially that the level is not too high or low. Also, check the condition of the fluid. Apart from that, the list of "typical" causes of P0741 includes: Faulty...

I have a 2008 s550 Mercedes Benz. I'm having a hesitant/vibration in between shifts at a moderate acceleration.

Hello. The most common cause of this is a failure in the drive shaft coupling. The coupling begins to fail and this occurs. I would have this checked by a shop that specializes in this as it can be difficult...

Related articles

How Long Does a Variable Valve Timing (VVT) Switch Last?
Having Having a smooth running car is no accident. A lot of different parts have to work in conjunction with each other for the engine to run smoothly. The variable valve timing (VVT) system has a lot to do with...
P0970 OBD-II Trouble Code: Pressure Control Solenoid “C” Control Circuit Low
P0970 means there is a discrepancy between the desired hydraulic pressure and the actual hydraulic pressure due to faulty solenoids.
How to Best Use Your Car For Getting to College
When When traveling to college by car, you can choose from two primary options. You can drive by yourself or you can drive with friends or classmates. When trying to determine the best commuting method for your specific circumstances, keep...