Q: What does the Manually Close the Power Liftgate message mean?

asked by on January 04, 2016

What does the Manually Close the Power Liftgate message mean?

The Manually Close the Power Liftgate message can appear on your driver information center (DIC). When the DIC displays this message, it means that there is something obstructing your trunk and keeping the power liftgate from functioning.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

How often should I get my spark plugs replaced in my 2014 Chevrolet Spark

Hello. GM recommends that you have the spark pugs replaced ever 97,500 miles. This is part of their normal maintenance schedule. If you need to have this service done, consider YourMechanic, as a certified mechanic can come to you to...

What does the malfunction indicator Warning Light mean?

The malfunction indicator Warning Light is on your instrument cluster. It illuminates when the On-Board Diagnostics-Second Generation (OBD II) system detects an issue. The OBD II system monitors your vehicle’s emissions. When the malfunction indicator Warning Light is illuminated, it...

Smoke from engine cooling fan

It's not unusual for a fan to fail, and you can probably get away with replacing just that. But since the fan seized, there may be a blown fuse or fusible link back in the system that will also have...

What factors affect radio reception?

While your car’s audio system is pretty advanced, there are several different factors that can affect reception when you’re listening to the AM or FM band. Here’s what you should know: Station Interference: If you pass close to a...

What does the supplemental airbag Warning Light mean?

The supplemental airbag Warning Light is located on the instrument panel. When this light illuminates, then your vehicle has detected an issue with one or more of the airbag systems, or the seat belt pretensioners. You should have your vehicle...

Rep light is on and now wont start like not getting gas car was runing and cut off and would not re crank

You should have the computer scanned for additional codes and also check the fuel pressures to see if the no start is a computer sensor issue like crankshaft sensor or the fuel pump is not giving pressure.

What is the lockout prevention?

Lockout prevention is a handy feature that you’ll be glad you have. If you’re anything like the rest of us, you’ve at least had some close calls with locking your keys in the car, often in the ignition. Your...

How do I change the air outlet mode?

Your vehicle has four different air outlet modes: air flow to the upper body, air flow to the upper body and the feet, air flow to the feet, and air flow to the feet with windshield defogger. To switch between...

Brake pads, discs, and sensors replaced

Hello. Your vehicle has sensors that are installed into certain brake pads which alerts the driver when the brake pads are worn down to a certain point. These sensors need to be replaced whenever the brakes are done. They are...

Related articles

Understanding NHTSA’s Car Seat Recommendations For Children
“We’re “We’re having a baby” - four words that will forever change the lives of expectant couples. Once the joy (or, perhaps, shock) of the news wears off, many soon-to-be parents find themselves in a quandary of what to do...
4 Essential Things to Know About Winter Driving
Driving in snow is different than how you normally drive. Drive more slowly, keep your car clean, and use your car equipment carefully to stay safe.
The Best Used Cars to Buy If You're a General Contractor
If If you're a general contractor, you probably aren’t in the market for a used car. More likely, you’re looking for a pickup truck, because you need to haul equipment and supplies to various job sites. Most contractors will likely...