Skip the auto shop - Our mechanics make house calls

Q: Washer fluid not coming out

asked by on

My washer fluid reservoir is leaking. I need to know what I need to replace.

Hi. The windshield washer reservoir would need to be inspected to see if the reservoir is cracked. Other issues could be that the level sensor, pump motor or seals are starting to fail. I would recommend you have a mechanic, like one from YourMechanic, inspect your vehicle’s windshield washer system to pinpoint the problem.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2007 volvo s60 battery wont hold a charge or start car

You may have a failing voltage regulator that could be allowing the alternator to supply too much or too little amperage to the battery resulting in the battery never maintaining a consistent charge as it is designed to. The voltage...

Q: Parasitic battery drain

I would ask for help from one of the mechanics at YourMechanic. They have the diagnostic equipment and skill necessary to diagnose your parasitic battery drain, and fix the problem.

Q: Third gear crunching noise

Hello. This is usually caused by either low fluid in the transmission or due to a failure in one of the synchronizers. I usually check the fluid in the transmission first to see if it is low or worn. If...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...