Q: TIRE PRESSURE SENSOR FAULT: How do you determine which sensor is faulty?

asked by on February 24, 2017

TIRE PRESSURE SENSOR FAULT: How do you determine which sensor is faulty?

Depending on the vehicle and tire pressure system you can find out what sensor is defective by scanning the TPMS system to isolate the failed sensor. Another way is to use a sensor activator scanner near each wheel to test each sensor’s output.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Service tire monitor system light appears. Is it ok to continue to drive

As long as the tire pressure is not, in fact, low it is safe to drive. So, just check the actual tire pressure in all 4 tires. Using a tire pressure gauge, if you do find low pressure in one...

If the tire pressure sensors are faulty, will that cause my Advance Trac light to come on?

Your assumption is correct. The tire pressure monitoring system will not turn on the traction control light. These system work independently of each other. You need to connect a scanner capable of accessing the traction control system to read the...

Bad tire pressure sensor

Many tire pressure sensors that are located inside the vehicle tire assembly have a built in battery that does fail over time. Once the sensor does fail, it should be replaced with a new one. For tire pressure sensor assemlies...

Check Tire Pressure Light

Hello. The first thing I would do is make sure that the tire in question is inflated to proper pressure. If the pressure is low, even by a few pounds, it may set off the tire pressure light. If the...

How to reset TPMS if no button is available

The only way to reset the light is to put the system in relearn mode. First, make sure all the tire pressures are even set and to specifications. You may need to hook up a battery charger on low first...

How does the tire pressure monitoring system work?

Your car’s tire pressure monitoring system (TPMS) is designed to help you keep an eye on the tire pressure. If the system notices a drop in pressure in a tire below a specific threshold, it will turn on the Low...

my tpms light stays on even though my tires are properly inflated and all my sensors test that they are all working on the meter

The system has lost communication with the ECU and you will need to have the system recalibrated using the tech stream to clear and then recalibrate the TPMS system.

What should I know about changing a tire with the TPMS system?

Flat tires happen. That’s why your Accord has a spare tire. You also have a tire pressure monitoring system (TPMS) that monitors the air pressure in each tire. If it sees a drop in pressure, it turns on the Low...

What does the Low Tire Pressure warning light mean?

Your Altima is equipped with a tire pressure monitoring system (TPMS). It’s designed to keep track of the amount of air in your tires. If one of them drops below the threshold, the system turns on the Low Tire Pressure...

Related articles

What Is My TPMS Light For?
Have Have you ever looked at your tires in the parking lot and wondered if one was lower than the others? Did you brush that thought off, thinking it must be your imagination or the way the car is sitting?...
What Does the Tire Pressure Warning Light Mean?
The tire pressure light warns you when one or more of your tires is low on pressure and needs to be set to the correct PSI.
4 Essential Things to Know About Your Car’s Tire Pressure Gauge
The The tire pressure gauge is a sensor that reads the tire pressure of all four tires of a vehicle. Modern vehicles have a Tire Pressure Monitoring System (TPMS) built in. Starting in 2007, the TPMS has to report an...