Q: How long would a radiator hose replacement take?

asked by on

How long would a radiator hose replacement take?
My car has an automatic transmission.

You will need to be more specific with the year of the vehicle with the engine size and what radiator hose you need replaced if you want the correct time it will take to replace a radiator upper or lower hose.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How long would a radiator hose replacement take?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car steaming and leaking radiator fluid

I’m not sure what repair was done, but it sounds like a coolant hose was left loose. Do not drive the car with a major coolant leak. It will overheat very quickly. If the shop is a reputable one, they...

Q: Sluggish acceleration while in 2nd gear.

This could be traditional "turbo lag" - I would check the turbocharger boost control components for air leaks, or poor electrical connections. I would also check the throttle position sensor, which may not always be recognizing your foot pressing the...

Q: Wobbly Power steering pully part 2

The only suggestion on the pulley is to go to the dealer and see if it was ever sold separate from pump? It may not be available separately. Remove belt and turn the pulley by hand and watch pump shaft...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...